(There needs to be a solid connection between the metal part of the cartridge and metal part in the battery chamber so they can conduct an electrical charge). Make sure the connecting surfaces on both the vaporizer chamber and cartridge are clean and free from debris.If you are trying to vape and the battery seem to be working but no vapor is coming out of the cartridge, try unscrewing the cartridge and screwing in back on again (to ensure that there is a contact between the connector and cartridge).If the LED button starts blinking 5 or more times, when you are trying to use the device, this means that the battery is out of power and needs to be recharged.If you are pressing the top operation button and nothing is happening, please make sure the device is turned ON by pressing the button 5 rapidly.Always make sure your Leaf Buddi UI vaporizer is charged and turned ON.Battery is now charged and you are ready to vape away. Once the LED light turns off and battery is fully charged, unplug the Micro USB cable from the vaporizer.The LED indicator light on the vaporizer will glow RED while it is charging and turn off once the charging is complete. Insert the USB cable into your computer or any USB charging device.(Please note it’s best to turn the vaporizer OFF by clicking 5 times rapidly on the operation button). Plug the Micro USB charger cable into Vaporizer box mod, located at the bottom of the device.Hold down the operation button and inhale.(Once it finished Preheating the LED light will turn off, meaning Preheating is complete and you are ready to go). To use the Preheat function, simply hit the button 2 times rapidly, the LED indicator will light up and start preheating the coil for you.(As you are firing, indicator LED will light up that particular color and voltage setting to let you know what power setting you’re on). You will see the LED indicator light change color depending on the power setting you desire. Press the operation button rapidly 3 times to change the power (Variable Voltage) settings.To turn your battery ON / OFF, click the operation button 5 times rapidly, located at the top of the vaporizer (you should see the LED indicator at the top of the screen blink a couple of times, when it’s ON or OFF).Screw the cartridge onto the heating chamber of the vaporizer.Make sure your vaporizer battery is charged (see section below on charging your battery).Using Your Leaf Buddi UI Vaporizer How to use the UI mod, come to share the video. Available Colors: Black White Purple Red Blue and Green.Battery protections indicators: low voltage - 5 consecutive blinks (needs to recharge).Easy operation: push button to activate.
0 Comments
Leave a Reply. |